
Add to Cart
● For pressure washers pumps
● Hollow-shaft coupling for direct mounting to the pump, in just a few minutes
● No need to disassemble the motor front side
● Special executions on request
Advantage:
● Sufficient Power, slight current, low-temperature, lower noise
● High efficiency, good magnetic conductivity, good heat dissipation
● High-quality materials, high-quality bearings, rigorous craftsmanship
● Tailor-made, seamless connection, worry-free operation
1. Ambient temperature: -15℃≤θ≤60℃
2. Altitude: ≤1000m
3. Protection class: IP54
4. Insulation class: class F
5. Rated voltage: 220V, other voltage on request
6. Cooling type: IC 0141
7. Duty: Continuous(S1)
8. Rated frequency: 50HZ, other frequency on request
Production line
Production data
Single-Phase 2 Poles 3000Rpm 50Hz | ||||||||
FRAME | POWER | RPM | COSφ | EFF.% | CAPACITOR | VOLT | AMPERE | |
KW | H.P. | P.F. | U.F. | V | A | |||
711-2 | 0.37 | 0.5 | 2790 | 0.95 | 62 | 12.5 | 230 | 2.7 |
712-2 | 0.55 | 0.75 | 2790 | 0.98 | 61 | 16 | 230 | 4.0 |
90L1-2 | 1.8 | 2.5 | 2850 | 0.95 | 65 | 50 | 230 | 12.7 |
90L2-2 | 2.2 | 3 | 2840 | 0.99 | 72 | 60 | 400 | 13.4 |
100L2 | 2.2 | 3 | 2850 | 0.96 | 74 | 85 | 400 | 15.3 |
Single-Phase 4 Poles 1500Rpm 50Hz | ||||||||
FRAME | POWER | RPM | COSφ | EFF.% | CAPACITOR | VOLT | AMPERE | |
KW | H.P. | P.F. | U.F. | V | A | |||
711-4 | 0.25 | 0.35 | 1360 | 0.91 | 57 | 10 | 230 | 2.1 |
712-4 | 0.37 | 0.5 | 1380 | 0.94 | 65 | 16 | 230 | 2.6 |
90L1-4 | 1.5 | 2 | 1400 | 0.98 | 70 | 45 | 230 | 9.5 |
100L1-4 | 1.85 | 2.5 | 1390 | 0.97 | 68 | 55 | 230 | 12.2 |
100L2-4 | 2.2 | 3 | 1350 | 0.99 | 74 | 70 | 230 | 13.1 |
100L3-4 | 2.6 | 3.5 | 1350 | 0.96 | 74 | 80 | 230 | 17.5 |
112M1-4 | 3 | 4 | 1400 | 0.98 | 74 | 80 | 230 | 18.1 |
112M2-4 | 3.7 | 5 | 1410 | 0.96 | 76 | 100 | 230 | 22 |
Three-Phase 2 Poles 3000Rpm 50Hz | |||||||
FRAME | POWER | RPM | COSφ | EFF.% | VOLT | AMPERE | |
KW | H.P. | P.F. | V | A | |||
711-2 | 0.37 | 0.5 | 2780 | 0.82 | 82 | 400 | 0.8 |
712-2 | 0.55 | 0.75 | 2790 | 0.83 | 81 | 400 | 1.2 |
90L1-2 | 2.2 | 3 | 2820 | 0.86 | 78 | 400 | 4.9 |
90L2-2 | 3 | 4 | 2820 | 0.86 | 78 | 400 | 6.6 |
90L3-2 | 3.7 | 5 | 2820 | 0.80 | 83 | 400 | 8.6 |
100L1-2 | 3 | 4 | 2840 | 0.83 | 81 | 400 | 7 |
100L2-2 | 4 | 5.5 | 2850 | 0.86 | 82 | 400 | 8.5 |
100M1-2 | 4 | 5.5 | 2830 | 0.84 | 82 | 400 | 9.4 |
112M2-2 | 5.5 | 7.5 | 2840 | 0.85 | 83 | 400 | 11.7 |
132S1-2 | 5.5 | 7.5 | 2890 | 0.86 | 84 | 400 | 11.6 |
132S2-2 | 7.5 | 10 | 2900 | 0.86 | 84 | 400 | 15.4 |
132M1-2 | 11 | 15 | 2920 | 0.88 | 86 | 400 | 21.8 |
132M2-2 | 15 | 20 | 2920 | 0.88 | 86 | 400 | 29.3 |
160M1-2 | 15 | 20 | 2920 | 0.87 | 88 | 400 | 28 |
160M2-2 | 18.5 | 25 | 2920 | 0.87 | 89 | 400 | 34 |
Three-Phase 4 Poles 1500Rpm 50Hz | |||||||
FRAME | POWER | RPM | COSφ | EFF.% | VOLT | AMPERE | |
KW | H.P. | P.F. | V | A | |||
711-4 | 0.25 | 0.35 | 1370 | 0.73 | 64 | 400 | 0.8 |
712-4 | 0.37 | 0.5 | 1350 | 0.74 | 68 | 400 | 1.1 |
713-4 | 0.55 | 0.75 | 1350 | 0.75 | 66 | 400 | 1.6 |
90L1-4 | 1.5 | 2 | 1400 | 0.82 | 78 | 400 | 3.4 |
90L2-4 | 2.2 | 3 | 1400 | 0.79 | 77 | 400 | 5.4 |
90L3-4 | 2.6 | 3.5 | 1400 | 0.80 | 78 | 400 | 7.4 |
100L1-4 | 2.2 | 3 | 1400 | 0.80 | 81 | 400 | 5.1 |
100L2-4 | 3 | 4 | 1410 | 0.80 | 81 | 400 | 6.9 |
100L3-4 | 4 | 5.5 | 1420 | 0.80 | 82 | 400 | 9.4 |
100M1-4 | 4.4 | 6 | 1420 | 0.82 | 83 | 400 | 10 |
112M1-4 | 4 | 5.5 | 1420 | 0.80 | 83 | 400 | 9 |
112M2-4 | 5.5 | 7.5 | 1430 | 0.82 | 84 | 400 | 12.1 |
112M3-4 | 6.2 | 8.5 | 1425 | 0.82 | 84 | 400 | 13.5 |
112L-4 | 7 | 9.5 | 1430 | 0.80 | 85 | 400 | 13.8 |
132S1-4 | 5.5 | 7.5 | 1430 | 0.82 | 84 | 400 | 11.7 |
132S2-4 | 7.5 | 10 | 1430 | 0.84 | 84 | 400 | 15.4 |
132M1-4 | 9.2 | 12.5 | 1430 | 0.90 | 85 | 400 | 17.8 |
132M2-4 | 11 | 15 | 1430 | 0.90 | 87 | 400 | 21.3 |
132M3-4 | 12.5 | 17 | 1430 | 0.88 | 84 | 400 | 26 |
160M1-4 | 15 | 20 | 1450 | 0.86 | 89 | 400 | 29 |
160M2-4 | 18.5 | 25 | 1450 | 0.86 | 90 | 400 | 34 |
Three-Phase 6 Poles 1000Rpm 50Hz | |||||||
FRAME | POWER | RPM | COSφ | EFF.% | VOLT | AMPERE | |
KW | H.P. | P.F. | V | A | |||
71-6 | 0.25 | 0.35 | 880 | 0.73 | 45 | 400 | 1.1 |
90L-6 | 1.1 | 1.5 | 910 | 0.72 | 72 | 400 | 3.2 |
100L-6 | 1.5 | 2 | 910 | 0.80 | 74 | 400 | 3.9 |
112M1-6 | 2.2 | 3 | 940 | 0.80 | 80 | 400 | 5 |
112M2-6 | 3 | 4 | 940 | 0.80 | 79 | 400 | 6.9 |
132S1-6 | 3 | 4 | 940 | 0.78 | 80 | 400 | 6.9 |
132S2-6 | 4 | 5.5 | 950 | 0.79 | 82 | 400 | 9 |
132M1-6 | 5.5 | 7.5 | 950 | 0.79 | 83 | 400 | 12.4 |
132M2-6 | 7.5 | 10 | 950 | 0.79 | 83 | 400 | 16.5 |
160M1-6 | 7.5 | 10 | 960 | 0.77 | 87 | 400 | 16.5 |
160M2-6 | 11 | 15 | 960 | 0.79 | 88 | 400 | 23 |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Guarantee:
Guarantee for one year from shipped on board date. During the guarantee period, our company will provide free easy-damaged spare parts for problems caused by our quality of production or raw material, except the damageable spare parts caused by the customer's incorrect artificial operation. In addition, after expiration, our company provides cost spare parts for maintenance.
Our service:
1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available. Feel free to contact us.
4. All goods produced by ourselves, we provide one-stop services from designing, printing to processing. Customers can provide the design according to your request and sample making. Also, we can advise how to make the products according to customers' target prices.
FAQ:
1. Q: What's the MOQ?
A: We accept one piece.
2. Q: Are you a factory or trading company?
A: We are a manufacturer.
3. Q: Can you accept using our logo?
A: Yes, we can do OEM for you.
4. Q: What's the warranty period?
A: 1 year.
5. Q: What are the terms of payment?
A: T/T. 30% deposit and 70% against the B.L. copy or 100% L.C. at sight.