AC Electric Submersible Deep Well Water Pump For Agricultural
DP series self-priming Deep Well Pumps consist of an ejector unit and a centrifugal pump. the ejector unit can be put in a 4''diameter well. These pumps are suitable to convey clean water or non-aggressive chemical fluids. They are suitable to pump water from deep well and supply water automatically by pressure tank and pressure control. It is always advisable to install a foot valve with a strainer on the bottom of the inlet pipe.
Deep Well Pump APPLICATION:
1) Deep well pumps installed above ground with the jet body submerged guarantees function even when the static level of the well water alls as far as 35 meters below the level of the installed pump. So they are extremely reliable, economical, and simple to use and find many usages in domestic applications and the automatic distribution of water from small and medium-sized surge tanks, water in gardens, etc.
2) In all cases where the suction depth exceeds the normal capacity for surface pumps.
3) Suitable for pumping clean water and liquid which are not chemically aggressive to the pump components.
4) The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
5) Household Water Supply
6) Water Supply System
7) Cooling System
8) Boost System
PRODUCTS FEATURES:
1) Ceramic anti-sand structure, wear resistance, long lifespan
2) The best pump impeller with a suspension design
3) Oil-filled motor and can submersible depth over 40 m
4) Total head, wide voltage, high head, suitable for home and industrial use
STRUCTURAL CHARACTERISTICS:
| Main Specification | Standard | Optional |
| Transmission medium | Clean Water | |
| Pump body | Cast Iron, support under special anti-rust treatment | |
| Impeller | Brass | stainless steel impeller, PPO impeller |
| Motor housing | Aluminum | |
| Stator&Rotor | 1. Cold-rolled silicon steel sheet by a high-speed punching machine. 2. 100% high-quality copper wire |
| Front cover | Cast Iron | |
| Bearing | Chinese Best Quality Bearing | NSK, SKF, or on request |
| Mechanical seal | Graphene/Ceramic | Silicon Carbon |
| Shaft | Carbon Steel | Stainless Steel |
| Insulation | Class B | Class F |
| Protection | IP44 | IP54 |
| Voltage | 220-240V Single Phase | On Request |
| Frequency | 50HZ | 60HZ |
| Thermal protection | No | Yes |
| Automatic Pressure Control System | No | Yes |
| Cooling Type | External Ventilation | |
| Max. Suction Lift | 9M | |
| Max. Fluid Temperature | +60℃ | |
| Max. Environment Temperature | +40℃ | |
| Installation | Horizontal | |
| Connect Type | Thread | |
| CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC |
TECHNICAL DATA:
| Model | Output | Suction.Max | R.P.M. | Q.Max | H.Max | Suction.Max. | Pipe Dia | LxWxH | N.W. |
| HP / KW | (m) | (l/min) | (m) | (M) | (mm) | (Kg) |
| DP-550A | 0.75 / 0.55 | 15 | 2850 | 40 | 35 | 15 | 1"x1" | 490x210x230 | 16.5 |
| DP-750A | 1 / 0.75 | 20 | 2850 | 48 | 40 | 20 | 1"x1" | 490x210x230 | 17 |
| DP-505 | 1.5 / 1.1 | 25 | 2850 | 95 | 42 | 25 | 1"x1" | 525x250x300 | 31 |
Other voltages and frequencies available on request
INSTALLATION SIZE:
Deep Well Pump ADVANTAGE:
1) 100% high quality copper,100% output
2) Cold-rolled silicon steel sheet by a high-speed punching machine
3) Good quality bearing, the surface more smooth, the dimension more precise
4) Thermal protector
5) One year warranty
GUARANTEE
Guarantee for one year from shipped on board date. During the guarantee period, our company will provide free easy-damaged spare parts for problems caused by our quality of production or raw material, except the damageable spare parts caused by the customer's incorrect artificial operation. In addition, after expiration, our company provides cost spare parts for maintenance.
OUR SERVICE:
1) We are very glad that the customer gives us some suggestions for price and products.
2) Any questions, please let us know it in the first by E-mail or Telephone. We can deal with them for you in time.
3) Offer our customers the lowest prices. Streamline the buying and paying processes.
4) Deliver goods to our customers all over the world with speed and precision.
5) Ensure the excellent quality of our products.
6) 12 months FREE warranty.
7) Accept OEM
FAQ:
1). Q: How about the MOQ?
A: Usually, it is 50 PCS for each model.
2). Q: Are you a factory or a trading company?
A: we make water pumps, motors, alternators, and diesel generators since 2006.
3). Q: Can you accept to use our logo?
A: Yes, we can. Any OEMs are welcome!
4). Q: What are your payment terms?
A: 30% deposit by T/T in advance, pay 70% balance against B/L copy.
5). Q: How about the delivery time?
A: Usually, 10-30days. But it depends on your order quantity.
6). Q: How about the warranty?
A: 1 year from shipped on board date.
