Aluminium Housing 3 Phase Induction Motor 0.75KW 1HP Capacitor Running For Gear Box
Ms 3-phase aluminum asynchronous premium-efficiency motors take measures from design, materials, and processes, such as good positioning, rotor slot number, fan parameters, and sinusoidal windings to reduce losses, and efficiency can be increased by 2% - 8%, an average increase of 4%. The motor with gearbox widely used automated flow wrapping systems.
1) Adopt NSK Bearings with low energy consumption and quiet operation.
2) External heat sink to deliver maximum thermal performance designed to be easy maintenance and repair.
ZOZHI pump motor made of selected quality material, the latest design in entirety, Good performance, low noise, slight vibration, and safety and reliable cooperation
1.100% copper wire, cold-rolled silicon steel sheet, and complimentary accessories
2. Advanced three-phase brushless motor
3. C.E. certificate
High-quality Capacitor
Adopt suitable capacitor made by advanced production line, heat resistant to 85℃; the working lift is motor than 10000 hours.
Cold-rolled Stator
Good quality cold-rolled silicon is from WUGANG brand made by high-speed punching machine, less burr, high concentricity, and stability.
Coil with 100% Copper wire
100% copper wire, with thermal protector, make the pump stop working automatically at the condition of jam or overload, etc.
No leakage Of winding
100% coil testing to make sure each coil is energized, and no leakage at high voltage condition
Automated flow wrapping systems needed reliable drives for use on its machine's infeed conveyors. The gear motor of conveyors moves bakery items, including bread and pastries, into the wrapping machine. Therefore, accurate speed control of the singulation, profile, accumulation, and metering conveyors is critical to prevent downtime and waste caused by jamming and damaging the food products inside the wrapping machine.
| The revised standard includes the following line-motors |
| Model | MS802-4 |
| Power range | 0.75KW |
| Level | IE1-Standard Efficiency IE2-High Efficiency IE3-Premium Efficiency |
| Voltage | 230/400V/60Hz |
| Degree of protection | all |
| Operating mode | S1(permanent operation with constant load); motors that are designed for different operating modes but can still be operated permanently with rated output. |
| Degree of temperature | -20. C- + 60.C |
| Altitude | Up to 4000m above sea level |
| Number of Poles | 4 |
| Validity | Standard IEC |
3 Phase Induction Motor IE3 Premium Efficiency
| Model | Power | (V) | (A) | Spee d r/min | Eff. (%) | P.F. | T start/Tn | Ist/In |
| Kw | HP | 50% | 75% | 100% |
| IE3 MS801-2 | 0.75 | 1 | 230/400 | 2.82/1.63 | 2820 | 79.7 | 81.0 | 80.7 | 0.831 | 2.3 | 6.0 |
| IE3 MS802-2 | 1.1 | 1.5 | 4.0/2.3 | 2820 | 81.5 | 82.9 | 82.7 | 0.836 | 2.3 | 7.5 |
| IE3 MS90S-2 | 1.5 | 2 | 5.23/3.02 | 2840 | 84.0 | 85.0 | 84.2 | 0.857 | 2.4 | 7.5 |
| IE3 MS90L-2 | 2.2 | 3 | 7.44/4.3 | 2840 | 86.0 | 86.5 | 85.9 | 0.865 | 2.4 | 7.5 |
| IE3 MS100L-2 | 3 | 4 | 9.9/5.72 | 2850 | 88.2 | 87.3 | 87.1 | 0.873 | 2.4 | 8.0 |
| IE3 MS112M-2 | 4 | 5.5 | 400/690 | 7.48/4.32 | 2870 | 88.0 | 88.4 | 88.1 | 0.880 | 2.4 | 8.5 |
| IE3 MS132S1-2 | 5.5 | 7.5 | 10/5.8 | 2900 | 89.1 | 89.6 | 89.2 | 0.890 | 2.2 | 7.5 |
| IE3 MS132S2-2 | 7.5 | 10 | 13.5/7.8 | 2900 | 90.0 | 90.5 | 90.1 | 0.892 | 2.2 | 7.5 |
| IE3 MS160M1-2 | 11 | 15 | 19.5/11.3 | 2920 | 89.8 | 91.3 | 91.2 | 0.896 | 2.2 | 8.5 |
| IE3 MS160M2-2 | 15 | 20 | 26.2/15.1 | 2920 | 91.6 | 92.0 | 91.9 | 0.805 | 2.2 | 8.5 |
| IE3 MS160L-2 | 18.5 | 25 | 31.9/18.4 | 2920 | 92.1 | 92.5 | 92.4 | 0.910 | 2.2 | 8.5 |
| IE3 MS802-4 | 0.75 | 1 | 230/400 | 2.97/1.72 | 1400 | 81.0 | 82.7 | 82.5 | 0.770 | 2.4 | 7.0 |
| IE3 MS90S-4 | 1.1 | 1.5 | 4.25/2.45 | 1420 | 82.6 | 84.3 | 84.1 | 0.775 | 2.4 | 7.5 |
| IE3 MS90L-4 | 1.5 | 2 | 5.68/3.28 | 1420 | 83.8 | 85.4 | 85.3 | 0.778 | 2.4 | 8.0 |
| IE3 MS100L1-4 | 2.2 | 3 | 8.0/4.62 | 1440 | 84.3 | 86.7 | 86.7 | 0.798 | 2.4 | 8.0 |
| IE3 MS100L2-4 | 3 | 4 | 10.8/6.2 | 1440 | 86.0 | 87.6 | 87.7 | 0.801 | 2.4 | 8.0 |
| IE3 MS112M-4 | 4 | 5.5 | 400/690 | 7.97/4.6 | 1450 | 88.3 | 88.8 | 88.6 | 0.821 | 2.4 | 7.5 |
| IE3 MS132S-4 | 5.5 | 7.5 | 10.8/6.2 | 1450 | 89.0 | 89.7 | 89.6 | 0.825 | 2.3 | 7.5 |
| IE3 MS132M-4 | 7.5 | 10 | 14.4/8.32 | 1450 | 90.1 | 90.6 | 90.4 | 0.834 | 2.3 | 7.5 |
| IE3 MS160M-4 | 11 | 15 | 20.8/12.0 | 1460 | 90.5 | 91.5 | 91.4 | 0.838 | 2.2 | 7.0 |
| IE3 MS160L-4 | 15 | 20 | 27.9/16.1 | 1460 | 91.5 | 92.5 | 92.1 | 0.847 | 2.2 | 7.0 |
| IE3 MS90S-6 | 0.75 | 1 | 230/400 | 3.42/1.97 | 910 | 77.5 | 94.4 | 78.9 | 0.700 | 2 | 4.0 |
| IE3 MS90L-6 | 1.1 | 1.5 | 4.8/2.78 | 910 | 80.2 | 81.3 | 81.0 | 0.710 | 2 | 4.0 |
| IE3 MS100L1-6 | 1.5 | 2 | 6.35/3.66 | 930 | 81.3 | 82.6 | 82.5 | 0.720 | 2 | 5.0 |
| IE3 MS112M-6 | 2.2 | 3 | 8.98/5.2 | 940 | 83.2 | 85.0 | 84.3 | 0.730 | 2 | 5.0 |
| IE3 MS132S-6 | 3 | 4 | 11.9/6.87 | 960 | 84.5 | 85.8 | 85.6 | 0.740 | 2.2 | 6.5 |
| IE3 MS132M1-6 | 4 | 5.5 | 400/690 | 9.0/5.2 | 960 | 85.3 | 86.9 | 86.8 | 0.745 | 2.2 | 7.0 |
| IE3 MS132M2-6 | 5.5 | 7.5 | 12.1/7.0 | 960 | 86.9 | 88.2 | 88.0 | 0.750 | 2.2 | 7.0 |
| IE3 MS160M-6 | 7.5 | 10 | 16.1/9.3 | 970 | 87.5 | 89.0 | 89.1 | 0.760 | 2.2 | 7.0 |
| IE3 MS160L-6 | 11 | 15 | 22.9/13.2 | 970 | 89.0 | 90.2 | 90.3 | 0.770 | 2.2 | 7.0 |
IE2 High Efficiency
| Model | Power | (V) | (A) | (r/min) | Eff. (%) | P.F. | Ist/In | Tmax/Tn |
| Kw | HP | 50% | 75% | 100% |
| IE2 MS801-2 | 0.75 | 1 | 230/400 | 3.0/1.73 | 2800 | 76.5 | 77.3 | 77.4 | 0.813 | 2.2 | 2.3 |
| IE2 MS802-2 | 1.1 | 1.5 | 4.2/2.43 | 2800 | 79.0 | 80.0 | 79.6 | 0.825 | 2.2 | 2.3 |
| IE2 MS90S-2 | 1.5 | 2 | 5.53/3.19 | 2820 | 80.2 | 81.5 | 81.3 | 0.837 | 2.2 | 2.3 |
| IE2 MS90L-2 | 2.2 | 3 | 7.93/4.58 | 2820 | 82.2 | 83.5 | 83.2 | 0.837 | 2.2 | 2.3 |
| IE2 MS100L-2 | 3 | 4 | 10.5/6.06 | 2830 | 84.0 | 85.1 | 84.6 | 0.848 | 2.2 | 2.3 |
| IE2 MS112M-2 | 4 | 5.5 | 400/690 | 7.97/4.6 | 2850 | 85.4 | 86.8 | 85.8 | 0.848 | 2.2 | 2.3 |
| IE2 MS132S1-2 | 5.5 | 7.5 | 10.65/6.15 | 2870 | 86.7 | 87.3 | 87.0 | 0.860 | 2 | 2.3 |
| IE2 MS132S2-2 | 7.5 | 10 | 14.35/8.28 | 2870 | 87.6 | 88.3 | 88.1 | 0.860 | 2 | 2.3 |
| IE2 MS160M1-2 | 11 | 15 | 20.74/11.97 | 2900 | 89.0 | 89.8 | 89.4 | 0.860 | 2 | 2.3 |
| IE2 MS160M2-2 | 15 | 20 | 27.99/16.16 | 2900 | 90.0 | 90.5 | 90.3 | 0.860 | 2 | 2.3 |
| IE2 MS160L-2 | 18.5 | 25 | 33.83/19.53 | 2900 | 90.3 | 91.0 | 90.9 | 0.872 | 2 | 2.2 |
| IE2 MS802-4 | 0.75 | 1 | 230/400 | 3.28/1.9 | 1380 | 77.3 | 79.8 | 79.6 | 0.720 | 2.3 | 2.3 |
| IE2 MS90S-4 | 1.1 | 1.5 | 4.57/2.64 | 1400 | 79.9 | 81.7 | 81.4 | 0.743 | 2.3 | 2.3 |
| IE2 MS90L-4 | 1.5 | 2 | 6.02/3.48 | 1400 | 82.1 | 83.5 | 82.8 | 0.755 | 2.3 | 2.3 |
| IE2 MS100L1-4 | 2.2 | 3 | 8.42/4.86 | 1420 | 82.6 | 84.5 | 84.3 | 0.778 | 2.2 | 2.3 |
| IE2 MS100L2-4 | 3 | 4 | 11.32/6.54 | 1420 | 84.2 | 85.7 | 85.5 | 0.778 | 2.2 | 2.3 |
| IE2 MS112M-4 | 4 | 5.5 | 400/690 | 8.47/4.89 | 1430 | 85.8 | 87.0 | 86.6 | 0.790 | 2.2 | 2.3 |
| IE2 MS132S-4 | 5.5 | 7.5 | 11.18/6.45 | 1450 | 87.4 | 88.3 | 87.7 | 0.813 | 2.2 | 2.3 |
| IE2 MS132M-4 | 7.5 | 10 | 14.85/8.58 | 1450 | 88.2 | 89.0 | 88.7 | 0.825 | 2.2 | 2.3 |
| IE2 MS160M-4 | 11 | 15 | 21.84/12.61 | 1460 | 89.1 | 90.0 | 89.8 | 0.813 | 2.2 | 2.3 |
| IE2 MS160L-4 | 15 | 20 | 29.08/16.79 | 1460 | 90.2 | 91.1 | 90.6 | 0.825 | 2.2 | 2.3 |
| IE2 MS90S-6 | 0.75 | 1 | 230/400 | 3.82/2.2 | 910 | 73.4 | 76.3 | 75.9 | 0.650 | 2 | 2.2 |
| IE2 MS90L-6 | 1.1 | 1.5 | 5.25/3.03 | 910 | 77.0 | 78.8 | 78.1 | 0.673 | 2 | 2.2 |
| IE2 MS100L-6 | 1.5 | 2 | 6.77/3.91 | 940 | 79.6 | 80.8 | 79.8 | 0.697 | 2 | 2.2 |
| IE2 MS112M-6 | 2.2 | 3 | 9.69/5.59 | 940 | 80.4 | 81.6 | 81.8 | 0.697 | 2 | 2.2 |
| IE2 MS132S-6 | 3 | 4 | 12.56/7.25 | 960 | 81.0 | 83.4 | 83.3 | 0.720 | 2 | 2.2 |
| IE2 MS132M1-6 | 4 | 5.5 | 400/690 | 9.36/5.4 | 960 | 82.7 | 84.5 | 84.6 | 0.732 | 2 | 2.2 |
| IE2 MS132M2-6 | 5.5 | 7.5 | 12.47/7.2 | 960 | 84.8 | 86.2 | 86.0 | 0.743 | 2 | 2.2 |
| IE2 MS160M-6 | 7.5 | 10 | 16.78/9.69 | 970 | 86.4 | 87.5 | 87.2 | 0.743 | 2 | 2 |
| IE2 MS160L-6 | 11 | 15 | 24.19/13.97 | 970 | 88.2 | 89.2 | 88.7 | 0.743 | 2 | 2 |
IE1 Standard Efficiency
| Model | Power |
(V) |
(A) | P.F. | Eff.(%) | Speed
(r/min) | Tstart/Tn | Tmax/Tn | Ist/In(A) |
| kW | HP |
| MS561-2 | 0.09 | 0.12 | 220/380 | 0.57/0.33 | 0.68 | 62 | 2800 | 2.3 | 2.4 | 6 |
| MS562-2 | 0.12 | 0.16 | 220/380 | 0.67/0.38 | 0.71 | 67 | 2800 | 2.3 | 2.4 | 6 |
| MS631-2 | 0.18 | 0.24 | 220/380 | 0.91/0.53 | 0.75 | 69 | 2800 | 2.2 | 2.4 | 6 |
| MS632-2 | 0.25 | 0.33 | 220/380 | 1.17/0.68 | 0.78 | 72 | 2800 | 2.2 | 2.4 | 6 |
| MS711-2 | 0.37 | 0.5 | 220/380 | 1.65/0.95 | 0.80 | 73.5 | 2800 | 2.2 | 2.4 | 6 |
| MS712-2 | 0.55 | 0.75 | 220/380 | 2.33/1.35 | 0.82 | 75.5 | 2800 | 2.2 | 2.4 | 6 |
| MS801-2 | 0.75 | 1 | 220/380 | 3.03/1.75 | 0.85 | 76.5 | 2800 | 2.2 | 2.4 | 6 |
| MS802-2 | 1.1 | 1.5 | 220/380 | 4.42/2.55 | 0.85 | 77 | 2800 | 2.2 | 2.4 | 6 |
| MS90S-2 | 1.5 | 2 | 220/380 | 6.01/3.84 | 0.85 | 77 | 2800 | 2.2 | 2.4 | 6 |
| MS90L-2 | 2.2 | 3 | 220/380 | 8.61/4.98 | 0.86 | 78 | 2800 | 2.2 | 2.4 | 6 |
| MS100L-2 | 3 | 4 | 220/380 | 11.1/6.4 | 0.87 | 82 | 2870 | 2.2 | 2.3 | 7 |
| MS112M-2 | 4 | 5.5 | 380/660 | 8.2/4.7 | 0.87 | 85.5 | 2890 | 2.2 | 2.3 | 7 |
| MS132S1-2 | 5.5 | 7.5 | 380/660 | 11/6.4 | 0.88 | 85.5 | 2900 | 2.0 | 2.2 | 7 |
| MS132S2-2 | 7.5 | 10 | 380/660 | 15/8.6 | 0.88 | 86.2 | 2900 | 2.0 | 2.2 | 7 |
| MS160M1-2 | 11 | 15 | 380/660 | 21.3/12.2 | 0.88 | 88 | 2930 | 2.0 | 2.2 | 7 |
| MS160M2-2 | 15 | 20 | 380/660 | 28.7/16.4 | 0.89 | 89 | 2930 | 2.0 | 2.2 | 7 |
| MS160L-2 | 18.5 | 25 | 380/660 | 34.6/19.8 | 0.90 | 90 | 2930 | 2.0 | 2.2 | 7 |
| MS180M-2 | 22 | 30 | 380/660 | 40.9/23.4 | 0.90 | 90.5 | 2930 | 2.0 | 2.2 | 7 |
| MS561-4 | 0.06 | 0.08 | 220/380 | 0.49/0.28 | 0.58 | 56 | 1400 | 2.3 | 2.4 | 6 |
| MS562-4 | 0.09 | 0.12 | 220/380 | 0.67/0.39 | 0.61 | 58 | 1400 | 2.3 | 2.4 | 6 |
| MS631-4 | 0.12 | 0.16 | 220/380 | 0.84/0.48 | 0.63 | 60 | 1400 | 2.2 | 2.4 | 6 |
| MS632-4 | 0.18 | 0.24 | 220/380 | 1.12/0.65 | 0.66 | 64 | 1400 | 2.2 | 2.4 | 6 |
| MS711-4 | 0.25 | 0.33 | 220/380 | 1.44/0.83 | 0.68 | 67 | 1400 | 2.2 | 2.4 | 6 |
| MS712-4 | 0.37 | 0.5 | 220/380 | 0.94/1.12 | 0.72 | 69.5 | 1400 | 2.2 | 2.4 | 6 |
| MS801-4 | 0.55 | 0.75 | 220/380 | 2.69/1.56 | 0.73 | 73.5 | 1400 | 2.2 | 2.4 | 6 |
| MS802-4 | 0.75 | 1 | 220/380 | 3.48/2.01 | 0.75 | 75.5 | 1400 | 2.2 | 2.4 | 6 |
| MS90S-4 | 1.1 | 1.5 | 220/380 | 4.74/2.75 | 0.78 | 78 | 1400 | 2.2 | 2.4 | 6 |
| MS90L-4 | 1.5 | 2 | 220/380 | 6.31/3.65 | 0.79 | 79 | 1400 | 2.2 | 2.3 | 7 |
| MS100L1-4 | 2.2 | 3 | 220/380 | 8.6/5.0 | 0.82 | 81 | 1430 | 2.2 | 2.3 | 7 |
| MS100L2-4 | 3 | 4 | 220/380 | 11.7/6.8 | 0.81 | 82.5 | 1430 | 2.2 | 2.3 | 7 |
| MS112M-4 | 4 | 5.5 | 380/660 | 8.8/5.1 | 0.82 | 84.5 | 1440 | 2.2 | 2.2 | 7 |
| MS132S-4 | 5.5 | 7.5 | 380/660 | 12/6.9 | 0.84 | 85.5 | 1440 | 2.2 | 2.2 | 7 |
| MS132M-4 | 7.5 | 10 | 380/660 | 15/8.6 | 0.85 | 87 | 1440 | 2.2 | 2.2 | 7 |
| MS160M-4 | 11 | 15 | 380/660 | 22.3/12.7 | 0.85 | 88 | 1460 | 2.2 | 2.2 | 7 |
| MS160L-4 | 15 | 20 | 380/660 | 30/17.1 | 0.85 | 89 | 1460 | 2.0 | 2.2 | 7 |
| MS180M-4 | 18.5 | 25 | 380/660 | 36.4/20.8 | 0.85 | 90.5 | 1470 | 2.2 | 2.2 | 7.5 |
| MS180L-4 | 22 | 30 | 380/660 | 43.1/24.6 | 0.85 | 91 | 1470 | 2.2 | 2.2 | 7.5 |
| MS90S-6 | 0.75 | 1 | 220/380 | 4.0/2.3 | 0.70 | 72.5 | 910 | 2.2 | 2.2 | 5.5 |
| MS90L-6 | 1.1 | 1.5 | 220/380 | 5.5/3.2 | 0.72 | 73.5 | 910 | 2.2 | 2.2 | 5.5 |
| MS100L-6 | 1.5 | 2 | 220/380 | 6.9/4.0 | 0.74 | 77.5 | 940 | 2.2 | 2.2 | 6 |
| MS112M-6 | 2.2 | 3 | 220/380 | 9.7/5.6 | 0.74 | 80.5 | 940 | 2.2 | 2.2 | 6 |
| MS132S-6 | 3 | 4 | 220/380 | 12.4/7.2 | 0.76 | 83 | 960 | 2.2 | 2.0 | 6.5 |
| MS132M1-6 | 4 | 5.5 | 380/660 | 9.4/5.4 | 0.77 | 84 | 960 | 2.0 | 2.0 | 6.5 |
| MS132M2-6 | 5.5 | 7.5 | 380/660 | 13/7.5 | 0.78 | 85.3 | 960 | 2.0 | 2.0 | 6.5 |
| MS160M-6 | 7.5 | 10 | 380/660 | 16.5/9.43 | 0.80 | 87.5 | 970 | 2.0 | 2.0 | 6.5 |
| MS160L-6 | 11 | 15 | 380/660 | 24.1/13.8 | 0.79 | 89 | 970 | 2.0 | 2.0 | 6.5 |
| MS180L-6 | 15 | 20 | 380/660 | 31.5/18 | 0.81 | 86 | 970 | 2.0 | 2.0 | 7.0 |
| MS132S-8 | 2.2 | 3 | 220/380 | 10/5.8 | 0.71 | 85.5 | 710 | 2.0 | 2.0 | 5.5 |
| MS132M-8 | 3 | 4 | 220/380 | 13.3/7.7 | 0.72 | 82 | 710 | 2.0 | 2.0 | 5.5 |
| MS160M1-8 | 4 | 5.5 | 380/660 | 10.2/5.8 | 0.73 | 81 | 720 | 2.0 | 2.0 | 6.0 |
| MS180M2-8 | 5.5 | 7.5 | 380/660 | 13.6/7.8 | 0.74 | 83 | 720 | 2.0 | 2.0 | 6.0 |
| MS160L-8 | 7.5 | 10 | 380/660 | 17.7/10.1 | 0.75 | 85.5 | 720 | 2.0 | 2.0 | 6.0 |
| MS180L-8 | 11 | 15 | 380/660 | 25.1/14.3 | 0.76 | 87.5 | 730 | 2.0 | 2.0 | 6.5 |
Guarantee
Guarantee for one year from shipped on board date. During the guarantee period, our company will provide free easy-damaged spare parts for problems caused by our quality of production or raw material, except the damageable spare parts caused by customer's incorrect artificial operation. In addition, after expiration, our company provides cost spare parts for maintenance.
1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available; feel free to contact us.
4. All goods produced by ourselves, we provide one-stop services from designing, printing to processing. Customers can provide the design according to your request and sample making. Also, we can advise how to make the products according to customers' target prices.
