High-Performance Stainless Steel Pump Body And Shaft Peripheral Oil Pump 1HP
Oil Peripheral Water Pump APPLICATIONS
The stainless steel
water pump is suitable for acidity fluids, alkalinity fluids, wine, oil, hot water, high-temperature steam, etc. It is a high-performance, long-life, stainless steel pump body and shaft vortex pump.
Oil Peripheral Water Pump STRUCTURAL CHARACTERISTICS
| Main Specification | Standard |
| Transmission medium | max 100℃ temperature fluid, wine, acidity or alkalinity fluid, etc |
| Pump body | Stainless Steel |
| Impeller | Brass |
| Motor housing | Aluminum |
| Stator&Rotor | 1. Cold-rolled silicon steel sheet by high-speed punching machine. 2. 100% high-quality copper wire |
| Front cover | Cast Iron |
| bearing | Chinese best quality bearing |
| Mechanical seal | Silicon carbon |
| Shaft | Stainless Steel |
| Insulation | Class B |
| Protection | IP44 |
| Voltage | 220-240V Single Phase or 380-440V Three-phase |
| Frequency | 50HZ or 60HZ |
| thermal protection | Yes |
| Cooling Type | External Ventilation |
| Max. Suction lift | 9M |
| Max. Fluid Temperature | +100℃ |
| Max. Environment Temperature | +40℃ |
| Installation | Horizontal |
| Connect Type | Thread |
| CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC |
Oil Peripheral Water Pump TECHNICAL DATA
| Model | Rate Power | Q.Max (L/min) | H.Max (m) | Pipe Dia | N.W. (kg) | Overall Dimension(mm) |
| HP | KW | L | W | H |
| ZPS-40 | 0.75 | 0.55 | 40 | 50 | 1"x1" | 9.6 | 315 | 190 | 235 |
| ZPS-50 | 1 | 0.75 | 45 | 55 | 1 "x1" | 10.2 | 315 | 190 | 235 |
Oil Peripheral Water Pump ADVANTAGE
100% high-quality copper,100% output
Cold-rolled silicon steel sheet by a high-speed punching machine
Good quality bearing, the surface more smooth, the dimension more precise
Thermal protector
One year warranty
Oil Peripheral Water Pump GUARANTEE
Guarantee for one year from shipped on board date. During the guarantee period, our company will provide free easy-damaged spare parts for problems caused by our quality of production or raw material, except the damageable spare parts caused by the customer's incorrect artificial operation. In addition, after expiration, our company provides cost spare parts for maintenance.
FAQ:
1. Q: How about the MOQ?
A: Usually, it is 100 PCS for each model.
2. Q: Are you a factory or a trading company?
A: we made water pumps, motors, alternators, and diesel generators since 2006
3. Q: Can you do OEM?
A: Yes, we can. Any OEMs are welcome!
4. Q: What are your payment terms?
A: 30% deposit by T/T in advance, pay 70% balance against B/L copy.
5. Q: How about the delivery time?
A: Usually, 10-30days. But it depends on your order quantity.
6. Q: How about the warranty?
A: 1 year from shipped on board date
